bLa©k souL of a coMputer

Packet Tracer 5.2 models the following protocols:
Application: HTTP, HTTPS, TFTP, Telnet, SSH, DNS, DHCP, NTP, SNMP, AAA, Radius, TACACS, Syslog
Transport: TCP and UDP, TCP Nagle Algorithm & IP Fragmentation

Network

• IPv4, ICMP, ARP, IPv6, ICMPv6, IPSec, GRE, ISAKMP

• RIPv1/v2/ng, Multi-Area OSPF, EIGRP, Static Routing

• Multilayer Switching, L3 QoS, NAT

• Context Based Access Lists , Zone-based policy firewall and Intrusion Protection System on the ISR

Network Access/Interface

• Ethernet (802.3), 802.11, HDLC, Frame Relay, PPP

• STP, RSTP, VTP, DTP, CDP, 802.1q, PAgP, LACP

• L2 QoS, SLARP, Auto Secure, Simple WEP, WPA, EAP

Why IGRP is not available in this version? It is because IGRP is replace by EIGRP. Also it already being phased out on Cisco network equipment.

p/s:  if you want it..please  email me OK.

Hello..Today i am gonna share something which gonna bring smiles to you face.

Tired of searching & cracking antivirus?!..well i will share my way on using nod32 antivirus trial version exceeding the 30 days time trial. WARNING!!…

This method can be use if you have never install NOD32 in your pc. First download this trial version of NOD32. After finishing the installation you will notice that the antivirus will ask you username & password..Skip the process.No worry. Then Google nod32 username password. You will see lots of site which offer username & passsword.

After two weeks(just to be safe) using NOD32 or before the trial time is over, Google nod32 username password.

Put the new username & password and VOILA…

Thats all folks.

Because of there are lots of request for this application..I surrender..hehe..here are the codes..i will not hold responsible if something happens to your assignment..hehe..this is for education only..there are some simple errors..so watch out..you can also donate some $$ in my paypal..hehe..

ATTENTION to all lecturer, plz check you students JAVA projects related to 3des cause the student might be using this code as their work…haha..

************************* Read more »

The first things you need to know about using Bit Torrent:
– Bit Torrent is aimed at broadband users (or any connection better than dialup).
– Sharing is highly appreciated, and sharing is what keeps bit torrent alive.
– A bit torrent file (*.torrent) contains information about the piece structure of the download (more on this later)
– The method of downloading is not your conventional type of download. Since downloads do not come in as one
big chunk, you are able to download from many people at once, increasing your download speeds. There may be
100 “pieces” to a file, or 20,000+ pieces, all depending on what you’re downloading. Pieces are usually small (under 200kb)
– The speeds are based upon people sharing as they download, and seeders. Seeders are people who constantly
share in order to keep torrents alive. Usually seeders are on fast connections (10mb or higher).

In this tutorial, I will be describing it all using a bit torrent client called Azureus. This client is used to decode the .torrent files into a useable format to download from other peers. From here on out, I will refer to Bit Torrent as BT.

Which BT client you use, is purely up to you. I have tried them all, and my personal favorite is Azureus for many reasons. A big problem with most BT clients out there, is that they are extremely CPU intensive, usually using 100% of your cpu power during the whole process. This is the number one reason I use Azureus. Another, is a recently released plug-in that enables you to browse all current files listed on suprnova.org (the #1 source for torrent downloads).

Before you use the plug-in, take a look at http://www.suprnova.org, and browse the files. Hold your mouse over the links, and you’ll notice every file ends in .torrent. This is the BT file extension. Usually, .torrent files are very small, under 200kb. They contain a wealth of information about the file you want to download. A .torrent file can contain just 1 single file, or a a directory full of files and more directories. But regardless, every download is split up into hundreds or thousands of pieces. The pieces make it much easier to download at higher speeds. Back to suprnova.org. Look at the columns:

Added | Name | Filesize | Seeds | DLs (and a few more which aren’t very useful.)

I’ll break this down.
Added: Self explanitory, its the date the torrent was added.
Name: Also self explanitory.
Filesize: Duh
Seeds: This is how many people are strictly UPLOADING, or sharing. These people are the ones that keep .torrent files alive. By “alive”, I mean, if there’s no one sharing the .torrent file, no one can download.
DLs: This is how many people currently downloading that particular torrent. They also help keep the torrent alive as they share while they download.

It’s always best to download using a torrent that has a decent amount of seeders and downloaders, this way you can be assured there’s a good chance your download will finish. The more the better.

Now that you should understand how torrent files work, and how to use them, on to Azureus!
First, get JAVA! You need this to run Azureus, as java is what powers it. Get Java here: http://java.sun.com/j2se/1.4.2/download.html
Next, get Azureus at: http://azureus.sourceforge.net
Next, get the Suprnovalister plugin from http://s93732957.onlinehome.us/storage/suprnovalister.jar

Install Java JRE before you do ANYTHING.

Install Azureus, and then in the installation folder, create 2 more folders. ./Plugins/suprnovalister (For example, if you installed Azureus to C:\PROGRAM FILES\AZUREUS, create C:\PROGRAM FILES\AZUREUS\PLUGINS\SUPRNOVALISTER). Next, put the suprnovalister.jar file that you downloaded, in that folder.

Load up Azureus, and if you want, go through the settings and personalize it.

The tab labeled “My Torrents” is the section of Azureus you need the most often. That lists all your transfers, uploads and downloads. It shows every bit of information you could possibly want to know about torrents you download.

In the menu bar, go to View > Plugins > Suprnova Lister. This will open up a new tab in Azureus. Click on “Update Mirror”. This will get a mirror site of suprnova.org containing all current torrent files available. Once a mirror is grabbed, choose a category from the drop-down box to the left and click “Update”. Wah-lah, all the available downloads appear in the main chart above. Just double click a download you want, and bang its starting to download. Open the “My Torrents” tab again to view and make sure your download started.

After your download has finished, be nice, and leave the torrent transferring. So people can get pieces of the file from you, just as you got pieces from other people.

Alternatively, if you don’t want to use the plugin… you can just head to suprnova.org and download files to any folder. Then go to File > Open > .torrent File in Azureus.

This should about wrap it up for the Bit Torrent Tutorial. If you guys think of anything I should add, or whatnot, just let me know and I’ll check into it.

As a networking student, i should know about this as this is the easiest way to practice my networking skills. Although some of the protocols are not in the application, it’s really worth a try.As the lab in my faculty are shared with other students such as the master students. The router and switches are also limited. Sometimes i didn’t get to finished my lab work cause sometimes they will be class conducted in the lab.


If you want to download the Packet Tracer, click part 1, part 2 and part 3.

Have a nice day to all networkers all around the universe!!!..

Well…i have lots of ebook you know..programming, Linux, Windows XP and also on JAVA. To be unselfish, i decide that i share you all with some of my ebook..

1. Hacked your XP

this ebooks is all about tweaking your XP.

2. PC maintainance

how to maintain your pc to be healthy just like the owner=)

want more?just free to contact me as i will try hard to find the e-book that you all are looking for=)

mahalo..